Tikka 558, 590, 595, 658, 690 and 695

A durable ultra-light replacement for your Tikka 558, 590, 595,658,  690 or 695 factory handle. Oversized bolt knob made from carbon fiber, with the bolt handle CNC machined from grade 5 titanium alloy. Available either straight or swept back, for both right and left handed rifles. This handle and knob combined weigh just under 1oz (28.2g) - less than the original factory steel handle!



We start with only the best quality grade 5 titanium alloy (Ti6Al4V) and CNC machine each handle to tight tolerances. We then deburr the handles in a ceramic media, clean, visually inspect and test fit each before packing. The resulting finish is a smooth non-glare titanium grey to dark-grey color. Some variations in shade of color occur between different production batches due to media changes. See a full YouTube review (fitted to a Tikka 590) from one of our customers by clicking here

Fitting Guide

The Tikka 590, 595, 690 and 695 bolt handle is dovetailed and slides into a slot in the bolt body. The shroud needs to be removed first followed by adjusting the firing pin assembly. The exact steps are documented in this youtube video (same steps as the Tikka T3 shown).



Our bolt handle is designed for a tight fit with absolutely no movement. We test every single handle prior to packing in a specially made dovetail gage EDM wirecut to precise dimensions. Due to variations in the dimensions of the mating slot of the bolt body, some minor fitting may be required when fitting our handle to individual rifles. This will require filing or stoning one or both angles of our bolt handle to suit (identify which surface rubs against the slot). In nearly all these cases the dovetail slot in the bolt body isn't machined true. Best results are achieved when removing only a minimum amount of material and retesting the fit regularly.